What Do You Know About

Standard Colors for Your Underground Utilities

If you find underground utilities, you can easily determine what type of utility it is for. However, a long time ago, it was difficult to identify these utility lines and so when people try to dig there were many risks involved. Although not completely eliminated, risks today have been reduced. In order to prevent harm, it is important to know or identify these utility lines if your need to dig the ground. If you need to dig through a piece of land today, you are required by the OSHA to first identify or locate underground utilities. It is to prevent disaster. The worst thing that can happen if lines are not identified is that fatal injuries can happen. The location of the areas where the lines were struck can experience service interruption. Before digging their property, people should call 811 to call the utility companies so that these incidents are prevented. Utility companies can then mark out their respective lines when you call them out.

Marking lines may lessen the risks but there are time when accidents still happen. It is said that every 6 minutes, there is a utility line that is struck. When this happens, it affects traffic lights, wastewater pipes, telecommunication lines and more. These incidents affect public health and safety.

Companies can locate utility lines through the use of GPR or Ground Penetrating Radar. When locating utility lines underground, this machine makes it easy to do so. Companies can locate their utility lines if any property owner calls 811.

It is easier to identify underground utility lines today because they now use different colors for each utility. Here are the colors used for different utilities.

White lines are for proposed excavation sites. It locates areas that will be excavated in the near future.

If you see pink lines, they are temporary survey markings. Legal property boundaries are marked off by these pink lines.

If you see red lines, then you can be sure that these are electric power lines, cable, conduit, and lighting cables. The color red is perfect for electric works because it is associated with fire and danger.

Lines for gas, oil, steam, petroleum, and gaseous materials use the color yellow. Natural gas leaks can create potentially disastrous situations and this is why it is appropriate to use the bright yellow color.

If you see orange lines, then you should associate this with communication., alarm, signal lines, cable or conduit. Blue lines are used for potable water. Purple lines are used for reclaimed water, irrigation, and slurry lines. Green lines are used for sewer and drain lines. You can derail any project for a long time if you hit these lines.

Click here now if you want to learn more about the color coding of utility lines. You can view here for more.

Recommended reference: view publisher site